Cutting and Soldering Charge

When buying from LED Strip Lights you can get your LED Strip Lights cut to bespoke sizes. Each order of these strips comes with the option for up to 3 free cuts. Any order that exceeds this amount will be charged for any over 3.

For example, an order for 8 cuts will be charged for 5.

Whilst the functionality to cut the Strip Lights is common in every strip, the frequency you can cut them at varies.

The list below shows you how each strip light can be cut:

• 30 LEDs per metre can be cut every 10cm;
• 60 LEDs per metre can be cut every 5cm;
• 120 LEDs per metre can be cut every 2.5cm;

Whilst this is standard amongst 12v Single Colour and RGB Colour LED Strip Lights, our other ranges do have differing cut lengths.

Our RGBW LED Strip Lights for example, has 60 LEDs per metre, but due to their LED arrangement they can only be cut every 10cm. If you have 24v LED Strip then you will need to double the cutting length.

There are also a range of LED Strip Light Kits available in colour changing and single colour if you aren't sure on the lengths you need.

Problems with cut to length LEDs

Any LED Strips that have been cut down to size are always tested before they are sent out. To protect you against any further problems all of our Mirrorstone LED Tape comes with a 2 year manufacturers warranty.

This 2 year warranty can then be extended to 5 years, free of charge! That's cut to length strips with 5 year warranty!

If you'd like help planning your LED Strip Lights installation or simply would like to place your order over with our team directly then get in touch by calling 0116 321 4121 or send an e-mail to cs@ledstriplights.co.uk.