

Brand: | Mirrorstone |
Inner Width: | 11.2mm |
Length (m): | 1m |
Height (mm): | 7mm |
Transmission Rate: | 60-75% (Frosted Diffusers Only) |
Width (mm): | 15mm |
Mounting Type: | Recessed |
Recess your LED strip lights directly into the floor with our Recessed Aluminium Profile. Fitting our full ranges of single colour, dual colour & RGB strip lights in both 12 volt and 24 volt. As the internal width of the profile is 11.2mm, our wider LED strips, both RGBW and RGB LED Pixel Tape, will not fit inside of the profile.
Unlike the whole range of our Aluminium profiles, the recessed profile do not come with any brackets for surface mounting, although it does, however, still come with necessary end caps. Extra end caps can also be bought if you are looking to cut the LED strip lights down to specific sizes.
For something to house the LED strips, it will need to be as versatile and be able to be installed in to nearly anywhere you need them to be. The aluminium profiles are brilliant for this and can go in a wide range of installations, as the recessed profiles don't come with any brackets, installation is mainly used in areas like decking where they can either slide into where they are being installed or by having the area where it is mounted built up to it to specifically house it.
Its use in decking means it is very good for outside effect lighting as well.
With a greatly improved design, the new SlimPro line of aluminium profiles will be able to dissipate heat at a rate not seen before. This can double your LED strip's life expectancy by massively decreasing the heat pressures on it. This new SlimPro design also looks much more professional, with a stylish stainless steel look, and the choice between two different diffuser colours.
The available range of Aluminium profiles all have the option of coming with or without a diffuser which are available in either a clear or frosted diffuser.
The winged design means that the strip lights mounted within the profiles get better protection which is then furthered with the use of one of the available diffusers. Although both of the diffusers offer additional physical protection, their main use is for the effect that they achieve with the LED strips.
Primarily the frosted diffuser is used on most installations as it has a translucent finish to it. This translucent effect provides a better wash of light than the clear diffuser thus making it used more in areas where the strips are either directly visible such as decking or need a wash of light up or down a wall such as commercial installation.
Alternatively, the other available diffuser, clear, doesn't offer quite as much diffusion of light due to its transparency. This means that its main use is in areas where the LED strip lights are not directly visible. This lack of diffusion means that the diffuser is used mainly in under cabinet lighting to provide as much light as possible.
Despite mainly being used for their visual qualities, our Aluminium profiles all come with the second, hidden quality. They can extend the life of the LED strips by around 50% meaning you can have lifespan of nearly 75,000 hours.
Even though LEDs are renowned for their remarkable life expectancy, strip lights that have been mounted onto Aluminium profile can outlast a whole host of LED products with the potential of having life of up to 20 years! This increase in life expectancy is because the Aluminium is an efficient dissipater of heat that is generated by the LED strips, allowing them to run at a lower temperature.
For any further questions in regards to the profiles that are available, advice for installing them or any inquiries about then don't ponder on getting in touch by sending an e-mail to cs@ledstriplights.co.uk or by calling 0116 321 4121.
Good quality profile but not the easiest to install. You'll need to take extra care to make sure everything sits perfectly. The final effect is good though - nice clean lighting.
I used this in my bedroom remodel to get a clean, recessed look. It was exactly what I wanted - flush, neat, and modern. Paired it with a cool white strip, and it makes the room feel so much more sleek and spacious. Highly recommend for anyone going for a high-end, subtle finish.
Absolutely fantastic product! I used this recessed profile to create a hidden lighting effect in my home office. It's really easy to install once you have the wall or ceiling prepped, and the finish is seamless. The light it gives off is soft, and the 11.2mm width fits perfectly with the 10mm LED strip I had.